Built for sun, not just good looks
Orange County driveways get very little freeze damage, but they get a lot of ultraviolet light. That is the main reason garage epoxy fails when people put it outside: standard epoxy fades, chalks and turns amber in direct sun. For driveways we use UV-stable aliphatic resins, usually polyaspartic or polyurea based, which keep their color and gloss far longer outdoors. Hot tire pickup is another problem with cheap kits. Tires warmed by a summer drive on the 91 or the 5 can soften a weak coating and pull it up. A properly cured, professional system resists that.
Common driveway problems we cover
Oil and transmission stains. Older cars, project vehicles and work trucks leave drips that soak deep into bare concrete. We degrease and grind before coating, and the new surface wipes clean afterward.
Tire marks. Plasticizers from tires stain concrete dark. A coated surface does not absorb them the same way.
Patchwork concrete. Many West Anaheim and central Anaheim homes have an original driveway with newer sections poured for a widened approach or a side yard pad. A coating ties them together in one color.
Dull, sun-beaten stamped concrete. Faded stamped drives can be cleaned and recoated with a tinted sealer or a color system instead of being torn out.
Anaheim Hills and HOA approvals
Many communities in Anaheim Hills and the newer tracts near the canyon have homeowners associations with rules about exterior colors and materials. Before we schedule, it is worth asking your HOA whether a driveway color change needs approval. We can provide a sample board and a product sheet for your application. On steep hillside drives, we add more grit to the final coat so it keeps traction when the morning marine layer leaves the concrete damp.
Choosing color and texture
A full flake broadcast gives the most forgiving surface, since the speckled pattern hides dust, leaves and small marks. Earth tones like tan, sand and terracotta match the stucco and tile roofs common across the city. Grays suit more modern remodels. Solid colors are possible but show dirt more. We bring physical samples so you can see them in Anaheim's bright light, which washes out colors more than a showroom does.
How the work goes
We start by checking the slab for cracks, lifted panels and drainage. Cracks are routed and filled. Then the whole surface is diamond ground to open it up and remove old sealers and stains, and all dust is vacuumed. A primer coat goes on, then the color base and flake, and finally a clear UV-stable top coat with anti-slip aggregate. Most two-car driveways take two days. Foot traffic is fine within hours, and cars can usually park on it after about a day.
Santa Ana winds can blow dust and leaves into wet coating, so we watch the forecast and reschedule when strong winds are expected. We also start early on hot days, when the slab is cooler.
After it is done
Hose off dust and leaves and wash it with a mild cleaner now and then. Wipe up oil drips. Avoid harsh solvents and pressure washer tips held right against the surface. Under normal use, a fresh clear top coat after several years brings back the shine.
Questions
Can you coat just the driveway apron?
Yes, though we usually recommend coating the full drive for an even look. We can also carry the same finish into the garage with our garage floor epoxy.
Do you work outside Anaheim?
Yes. We also serve Orange, Fullerton, Placentia, Yorba Linda, Buena Park and Garden Grove.
Ready to fix a stained driveway?
Call (657) 220-6760. We will measure, show you color and flake samples and send a written estimate.