Epoxy Countertops in Anaheim, CA

Most Anaheim homes went up between 1950 and 1979, and plenty of them still have the tile or laminate counters a remodel left behind decades ago. We pour epoxy countertops over existing kitchen, bath and bar tops in Anaheim, CA, turning a dated surface into a seamless marble, stone or metallic finish without tearing out cabinets.

(657) 220-6760

Get a Free Estimate

Tell us about the floor. Only your name and phone are required.

Form powered by splitforms

White marble-look epoxy countertop in a remodeled ranch kitchen in Anaheim, CA

Built for the Anaheim tract kitchen

Postwar subdivisions spread across the city's west and central neighborhoods in the 1950s and 1960s: repeating floor plans on curving streets, small galley or L-shaped kitchens, and bathrooms with a single vanity. Neighborhoods like Sherwood Forest and Claredge date from that era, and the houses around the Anaheim Colony and in Anaheim Hills cover the years before and after. Many of these homes have been updated piece by piece, so you often find decent cabinets topped with 4-inch ceramic tile, worn laminate, or a 1990s cultured marble vanity.

That is the situation epoxy is made for. Instead of paying to rip out tops and risk damaging cabinets, we bond a new surface directly over the old one. The result is one continuous slab-look top with no grout lines to scrub.

Finishes we pour

  • Marble look. A white or cream base with hand-worked gray or gold veining, the most requested style in Anaheim kitchens.
  • Granite and stone looks. Speckled and layered colors that hide crumbs and everyday wear.
  • Metallic. Pearl and mica pigments that swirl into a three-dimensional look, using the same resin chemistry as our metallic epoxy floors.
  • Solid colors. Matte black, warm white or a bold color for a bar top or laundry room.

How the pour works

  1. Inspect the base. The existing top has to be solid and well attached. Loose laminate is re-glued; cracked or hollow tile is fixed or replaced with a new substrate.
  2. Fill and level. Grout lines on tile tops are filled flush, and the surface is sanded so the primer can bite.
  3. Mask the room. Cabinets, floors, appliances and walls are covered. Drips run off the front edges onto plastic, not your floor.
  4. Prime and base color. A primer and base coat go down first so the old pattern does not show through.
  5. Flood coat and design. Clear and pigmented epoxy is poured, spread and worked into veins or swirls. A heat gun releases bubbles.
  6. Edge finish. The front edges are smoothed as drips form, then sanded and touched up after the first cure.

Most kitchens take two to three days of work. You can usually set light items on the counters after about three days and return to full use after the resin has cured for about a week.

Installer spreading epoxy flood coat on a bathroom vanity top in Anaheim, CA

What to expect from epoxy

We want you to be happy in five years, so here is the honest version:

  • Heat. Epoxy will soften or mark under a hot pan. Use trivets, just as you would with many laminate tops.
  • Scratches. It is harder than laminate but softer than quartz. Always cut on a board. Fine scratches can be buffed or a fresh clear coat can be added later.
  • Sunlight. Direct sun through a kitchen window over years can amber a white top. UV-resistant resin slows this, and we use it on sunny counters.
  • Food contact. Once fully cured, the products we use are rated for food contact. We give you the cure time in writing.

Anaheim weather and curing

Epoxy likes it warm and steady, ideally around 70 to 80 degrees. Most of the year Anaheim's weather cooperates. On hot late-summer days and during Santa Ana wind events, we keep windows closed, run the AC and avoid working near open doors where dust and dry wind can blow onto a wet surface. In the cooler, damper months we may bring in a heater to keep the room in the right range overnight.

Beyond the kitchen

Bath vanities, wet bars, laundry folding counters, built-in desks, garage workbenches and backyard bar tops under a patio cover are all good candidates. Owners turning a garage into a game room or ADU often pair an epoxy counter with a coated floor. Ask about our garage floor epoxy if you want the two to match.

Cost compared with replacing

Epoxy resurfacing is typically well below the price of new quartz or granite, mainly because nothing gets removed, templated or hauled away and plumbing stays connected. The final number depends on square footage, the number of edges and seams, any backsplash and how much prep the old top needs. We measure on site and give you a firm written quote.

Common questions

Can you pour over tile?

Yes, if the tile is firmly bonded. Grout lines get filled first so they do not telegraph through.

What about the sink?

Undermount and drop-in sinks can usually stay. We tape and detail around them.

How do I clean it?

Warm water and mild dish soap. Skip abrasive powders and harsh solvents.

Ready to refresh your Anaheim countertops?

Call (657) 220-6760 and we will come look at your counters, bring color samples and give you a written price for the pour.